e-mail: sales@iseliquidator.com

NEW LOCATION: 15960 FM 800, SAN BENITO, TEXAS 78586

Div of TOMMY THOMPSON MARKETING INC.
PHONE: 956-444-0004 * FAX: 956-444-0006 * CELL PH: 956-299-6148
VOICE ORDER LINE: 888-351-5550 * FAX ORDER LINE: 877-350-5574
OUR “31^st” year in the wholesale liquidation business
LAST UPDATED: July 18, 2010
THE FOLLOWING IS A LIST OF EQUIPMENT THAT WERE REMOVED FROM HOSPITALS AND MOST OF THESE ITEMS ARE IN GOOD WORKING ORDER, HOWEVER, WE ARE NOT ABLE TO TEST THEM. THEREFORE, THEY ARE SOLD AS IS (NO WARANTY). MOST ITEMS ARE SOLD FOR JUST A FEW CENTS ON THE DOLLAR, AS WE ARE A LIQUIDATOR.
ADAPTER DISTILLING      
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45901
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 45.24
              YOUR PRICE EACH: $ 27.14
                  WEIGHT EACH: 0.22000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS ADAPTOR DISTILLING WITH SIDE ARM AT ANGLE OF 75 DEGREES                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


ADENOTOME               
              MANUFACTURED BY: KARL STORZ ENDOSCOPY          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13445
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 400.00
              YOUR PRICE EACH: $ 175.00
                    CONDITION: USED   
                  DESCRIPTION: 
USED FOR REMOVING ADENOIDS. STAINLESS STEEL AND IN GOOD CONDITION.                                  


CLICK ON PICTURE TO ENLARGE


AERO-PULSE PRESSURE PUMP
    MANUFACTURERS PART NUMBER: MSC 80709T        
              MANUFACTURED BY: MEDLINE INDUSTRIES            
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12925
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 50.00
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


AEROSOL PARTICLE COUNTER
    MANUFACTURERS PART NUMBER: 245               
              MANUFACTURED BY: ROYCO INSTRUMENTS INC         
       LISTED IN ISE CATEGORY:  2616 = PARTICLE/COLONY COUNTERS                            
             ISE STOCK NUMBER: 38630
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: AS IS  
                  DESCRIPTION: 
Uses Model 242 sensor, our stock number 38608, and includes original manual.                        

SORRY PICTURES NOT AVAILABLE AT THIS TIME


AFC2 AIRFLOW CONTROLLER 
    MANUFACTURERS PART NUMBER: 4005186           
              MANUFACTURED BY: RICHMOND TECHNOLOGY, INC.     
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 10703
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
SN:990440051862691. OUTPUT IS +/-kDVC TO +/-8.0kVDC, 7.0 uAMP (MAX)                                 


CLICK ON PICTURE TO ENLARGE


AIR CLEANER/IONIZER     
    MANUFACTURERS PART NUMBER: 1701              
              MANUFACTURED BY: ASSOCIATED MILLS, INC         
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 41543
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 65.00
              YOUR PRICE EACH: $ 32.50
                    CONDITION: USED   
                  DESCRIPTION: 
POLLENEX ELECTRONIC AIR CLEANER/IONIZER. IN WORKING CONDITION.                                      


CLICK ON PICTURE TO ENLARGE


AUTOCLAVE STERILIZER    
    MANUFACTURERS PART NUMBER: STM-E             
              MANUFACTURED BY: MARKET FORGE INDUSTRIES, INC. 
        MANUFACTURES WEB SITE: http://www.mfii.com                                                                        
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 47135
                        VOLTS:   250
                     AMPERAGE:  20.0
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 7,756.00
              YOUR PRICE EACH: $ 2,500.00
                    CONDITION: USED   
                  DESCRIPTION: 
INDUSTRIAL STERILIZER IN A SMALL PACKAGE. OVERALL DIMENSIONS: 18.75" WIDTH X 31" DEPTH X 29" HEIGHT;
CHAMBER DIMENSIONS: 26" LENGTH X 16" DIAMETER; CHAMBER CAPACITY: 3 CUBIC FT.; 250 DEG F STERILIZING 
TEMP; OPERATING PRESSURE: 15PSI 1 ATM - 100 KILOPASCALS. WEIGHT IS 141 lbs.                         


CLICK ON PICTURE TO ENLARGE


B-HEMOGOBLIN PHOTOMETER 
    MANUFACTURERS PART NUMBER: HB CHECKER        
              MANUFACTURED BY: HEMOCUE AB                    
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13553
           QUANTITY AVAILABLE: 15
      YOUR PRICE 1 TO 9 PRICE: $ 50.00
               10 TO 99 PRICE: $ 50.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
HemoCue donor Hb Checker system: Measurement range: 10.5—19.0 g/dL (105—190 g/L or 6.5—11.8 mmol/L).
Accuracy: Correlation of 0.99 when compared to the reference method (ICSH method).                  
Principle of operation: Hemoglobin concentration is determined by measuring the absorbance of       
hemolyzed blood at the Hb/HbO2 isobestic point. Deoxycholate hemolyses the erythrocytes and         
hemoglobin is released. This method correlates well with the reference method for hemoglobin        
determination (the ICSH method). The photometer uses a double wavelength measuring method, 506 nm   
and 880 nm, for compensation of turbidity. Method of operation: van Kempen E J and Zijlstra W G.    
Spectrophotometry of hemoglobin and hemoglobin derivativies. Advances in Clinical Chemistry, vol 23,
199-257 (1983). Package Dimensions: 160 x 210 x 90 mm (6.29 x 8.25 x 3.54 inches).Weight: 1 kg (2   
pounds). Power: Drawn from HemoCue AC Adapter or internal batteries. Storage and environmental      
requirements Microcuvette: The microcuvettes are to be stored at 15-30 deg C (59-86 deg F) in a dry 
place. Once opened the microcuvettes are stable for three months. Always keep the container closed. 
Photometer: The photometer can be stored at temperature 0-50 deg C (32-122 deg F). The operating    
temperature is 15-40 deg C (59-104 deg F). Allow the photometer to reach ambient temperature before 
use. The photometer usually  displays the results within 45 seconds. Sample volume: 10 micro L.     
Sample material: Capillary or venous blood. C alibration: The system is factory calibrated against  
the ICSH reference method for hemoglobin. These units are classified as used as the test materials  
appear to have been used We are not able to properly certify or check these units, therefore sold as
is condition                                                                                        
                                                                                                    


CLICK ON PICTURE TO ENLARGE


BEAKER                  
    MANUFACTURERS PART NUMBER: 2000mL BEAKER     
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15370
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 18.95
              YOUR PRICE EACH: $ 9.48
                    CONDITION: USED   
                  DESCRIPTION: 
KIMAX GLASS BEAKERS: GRIFFIN LOW FORM, MATTE FINISH MARKING AREA, EASY TO READ +- 5% GRADUATED SCALE

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BEAKER                  
    MANUFACTURERS PART NUMBER: 1000mL BEAKER     
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15371
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX GLASS BEAKER: 1000mL                                                                          

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BEAKER                  
    MANUFACTURERS PART NUMBER: 300mL             
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 12192
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BEAKER                  
    MANUFACTURERS PART NUMBER: 5900              
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 12377
           QUANTITY AVAILABLE: 0
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
FLEAKER BY CORNING. PYREX 5900. 500mL.                                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BED                     
    MANUFACTURERS PART NUMBER: EXAMINATION BED   
              MANUFACTURED BY: TITAN TECHNOLOGY              
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 42015
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 1,875.00
              YOUR PRICE EACH: $ 800.00
                  WEIGHT EACH: 225.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
EXAMINATION BED: FLEX AND DISKTRACTION, MANUAL CONTROLS TO ADJUST POSITION OF PATIENTS NECK AND     
HEAD, IN VERY GOOD CONDITION, SOLD AS IS.                                                           

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BLOOD CULTURE SYSTEM    
    MANUFACTURERS PART NUMBER: TB-460            
              MANUFACTURED BY: DIAGNOSTIC INSTRUMENT CORP    
       LISTED IN ISE CATEGORY:  2611 = LAB: EQUIPMENT: BLOOD WORK                          
             ISE STOCK NUMBER: 49667
           QUANTITY AVAILABLE: 2
              YOUR PRICE EACH: $ 1,050.00
                    CONDITION: USED   
                  DESCRIPTION: 
BACTEC                                                                                              


CLICK ON PICTURE TO ENLARGE


BLOOD GAS ANALYZER      
    MANUFACTURERS PART NUMBER: 995S              
              MANUFACTURED BY: AVL SCIENTIFIC                
       LISTED IN ISE CATEGORY:  2611 = LAB: EQUIPMENT: BLOOD WORK                          
             ISE STOCK NUMBER: 48141
                        VOLTS:   120
                     AMPERAGE:   3.1
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 20,000.00
              YOUR PRICE EACH: $ 5,000.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
Analytes measured: 995-Hb: Carbon dioxide and oxygen partial pressures, hydrogen ion concentration  
reported as pH, hemoglobin                                                                          
984-S: Sodium, potassium and ionized calcium                                                        
Analytical system: Flow through, separate sample for each analyzer, electrolyte measurement by      
ion-selective electrode.                                                                            
Operator interface: 995-Hb: 2 row display, touch sensitive membrane keyboard 984-S: Dot-matrix LED  
display, 'Yes' and 'No' buttons                                                                     
Sample: 995-Hb: 95 µL whole blood or 50-100 mL expired air 984-S: 120 µL whole blood, serum,        
dialysate fluid or diluted urine                                                                    
Sample collection: Anaerobic for blood gas analysis; heparin anticoagulant                          
Calibration of blood gases: Integral gas mixer produces 2 mixtures from compressed air and carbon   
dioxide                                                                                             
Analysis rate: 995-Hb: Up to 30 samples/hour                                                        
984-S: Up to 40 samples/hour                                                                        
Results: 7 measured parameters and 13 calculated parameters                                         
Languages: English, French, German, Italian, Portuguese, Spanish                                    
Result recall: Last sample, can be recalculated using revised patient data, item requires cleaning  
and calibration and is missing front cover.                                                         


CLICK ON PICTURE TO ENLARGE


BOTTLE                  
    MANUFACTURERS PART NUMBER: SOLVENT BOTTLES   
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15330
           QUANTITY AVAILABLE: 73
        ORIGINAL FACTORY COST: $ 10.95
      YOUR PRICE 1 TO 9 PRICE: $ 5.48
               10 TO 99 PRICE: $ 4.11
                    CONDITION: USED   
                  DESCRIPTION: 
SOLVENT BOTTLES                                                                                     

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BOTTLE                  
    MANUFACTURERS PART NUMBER: 50mL              
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15331
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 12.95
              YOUR PRICE EACH: $ 6.48
                    CONDITION: USED   
                  DESCRIPTION: 
PYTEX BOTTLE: OIL AND SOLVENT BOTTLE, 50mL                                                          

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BOTTLE                  
    MANUFACTURERS PART NUMBER: 250mL             
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15335
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 13.95
              YOUR PRICE EACH: $ 6.98
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX BOTTLE, 250mL                                                                                 


CLICK ON PICTURE TO ENLARGE


BOTTLE                  
    MANUFACTURERS PART NUMBER: 995 1 GALLON      
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15393
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 65.00
              YOUR PRICE EACH: $ 32.50
                  WEIGHT EACH: 3.54000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
BOTTLES: LONG NECK 1 GALLON                                                                         

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BOTTLE                  
    MANUFACTURERS PART NUMBER: 125mL             
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15333
           QUANTITY AVAILABLE: 6
        ORIGINAL FACTORY COST: $ 12.95
              YOUR PRICE EACH: $ 6.48
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX BOTTLE, 125mL                                                                                 

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BOTTLE BABCOCK          
    MANUFACTURERS PART NUMBER: 34590-15          
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44803
           QUANTITY AVAILABLE: 11
        ORIGINAL FACTORY COST: $ 9.25
      YOUR PRICE 1 TO 9 PRICE: $ 4.63
               10 TO 99 PRICE: $ 3.47
                    CONDITION: USED   
                  DESCRIPTION: 
BABCOCK FOR FAT ANALYSIS. GLASS GRADLATED                                                           

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BOTTLE BABCOCK          
    MANUFACTURERS PART NUMBER: 34590-40          
              MANUFACTURED BY: VANCE PRODUCTS MANUFACTURING  
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44967
           QUANTITY AVAILABLE: 12
        ORIGINAL FACTORY COST: $ 36.00
      YOUR PRICE 1 TO 9 PRICE: $ 18.00
               10 TO 99 PRICE: $ 13.50
                    CONDITION: USED   
                  DESCRIPTION: 
BABCOCK PALEY BOTTLE                                                                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BURET                   
    MANUFACTURERS PART NUMBER: 17027F-100        
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44750
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 79.65
              YOUR PRICE EACH: $ 39.83
                    CONDITION: USED   
                  DESCRIPTION: 
CLASS A KIMAX BRAND STRAIGHT, STOPCOCK BURET WITH PTFE PLUG, 100ML.                                 
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BURET                   
    MANUFACTURERS PART NUMBER: 2110              
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44805
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 264.10
              YOUR PRICE EACH: $ 158.46
                    CONDITION: USED   
                  DESCRIPTION: 
25 ML. GRADUATED AT .1 ML INTERVIALS. DUAL STOCK COCK, BOROSILICATE GLASS.                          

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BURET                   
    MANUFACTURERS PART NUMBER: MBCO              
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44965
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 92.25
              YOUR PRICE EACH: $ 46.13
                    CONDITION: USED   
                  DESCRIPTION: 
100 CUBIC CM WITH STOPCOCK JACKET LENGTH 430 MM                                                     
                                                                                                    


CLICK ON PICTURE TO ENLARGE


BURET                   
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45895
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 154.00
              YOUR PRICE EACH: $ 77.00
                  WEIGHT EACH: 0.36000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
BURET, AUTOMATIC, STRAIGHT STOPCOCK WITH PTFE PLUG LABORATORY GRADE. 25ML BURET INCLUDES RUBBER     
BULB.                                                                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


BURET                   
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45900
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 90.47
              YOUR PRICE EACH: $ 54.28
                  WEIGHT EACH: 0.30000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
 GLASS BURET LENGHT 350MM 35MM DIA WITH FILTER WITH STOPCOCK.                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CAMERA CONTROL UNIT     
    MANUFACTURERS PART NUMBER: MTV-30D-2         
              MANUFACTURED BY: TOSHIBA AMERICA               
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13798
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


CARDIAC OUTPUT METER    
    MANUFACTURERS PART NUMBER: 78552-B           
              MANUFACTURED BY: HEWLETT PACKARD AGILENT       
        MANUFACTURES WEB SITE: http://www.hp.com                                                                            
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 43350
           QUANTITY AVAILABLE: 6
        ORIGINAL FACTORY COST: $ 198.00
              YOUR PRICE EACH: $ 100.00
                  WEIGHT EACH: 2.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
CARDIAC OUTPUT PORTABLE METER; POWER CORD, PROBE AND START REMOTE CORDS ATTACHED ON 4 UNITS, OTHER 4
UNITS DO NOT HAVE WIRING, IN GOOD CONDITION.                                                        


CLICK ON PICTURE TO ENLARGE


CCD VACUUM CONFIRMATION 
    MANUFACTURERS PART NUMBER: PXA-LS-901        
              MANUFACTURED BY: HOKUYO AUTOMATIC CO., LTD     
        MANUFACTURES WEB SITE: http://www.hokuyo-aut.jp                                                              
       LISTED IN ISE CATEGORY:  6640 = VACUUM PUMPS: BACKER, DIFFUSION, GAUGES, ACCESSORIES
             ISE STOCK NUMBER: 48597
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
CONTAINS TWO HITACHI HN482764G-2 EPROMS, ONE SHARP LHOO81A Z80-PI/O-D, ONE LH0080A-CPU-D AND ONE    
D8279C-2 PROGRAMMANLE KEYBOARD DISPLAY INTERFACE. THE UNIT USES A 3 PIN SRCN2A13-P3 CIRCULAR POWER  
CONNECTOR WHICH IS NOT INCLUDED. SENSOR ALSO NOT INCLUDED.                                          


CLICK ON PICTURE TO ENLARGE


CENTRIFIC CENTRIFUGE    
    MANUFACTURERS PART NUMBER: 225               
              MANUFACTURED BY: FISHER SCIENTIFIC             
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 49694
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 2,000.00
              YOUR PRICE EACH: $ 450.00
                    CONDITION: USED   
                  DESCRIPTION: 
Operating Features: Capacity: 360mL (24 x 15mL tubes) with optional rotor 04-978-52Q. Maximum       
speed/force: 5100rpm/3400xG (with 04-978-54Q rotor, two 15mL tubes and samples). Control panel      
includes a 30-minute timer, a solid-state speed controller and electronic brake. Photoelectric      
tachometer port in lid                                                                              
Safety Features: Extra-large, chemical-resistant, cross-linked polyethylene bowl. Cast-iron base    
with nonskid feet for stability.                                                                    


CLICK ON PICTURE TO ENLARGE


CENTRIFUGE              
    MANUFACTURERS PART NUMBER: 3530              
              MANUFACTURED BY: BAXTER SCIENTIFIC PRODUCTS    
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 15285
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 119.00
              YOUR PRICE EACH: $ 55.00
                    CONDITION: USED   
                  DESCRIPTION: 
CENTRIFUGE, SN: 199393                                                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CENTRIFUGE              
    MANUFACTURERS PART NUMBER: CENTRA GP8F       
              MANUFACTURED BY: IEC INTERNATIONAL EQUIP CO.   
        MANUFACTURES WEB SITE: http://www.iec-centrifuge.com                                                    
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 49678
                        VOLTS:   110
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 5,700.00
              YOUR PRICE EACH: $ 2,850.00
                    CONDITION: USED   
                  DESCRIPTION: 
Specifications: Maximum Force: 4550 x g. Maximum Speed: 5100 rpm. Maximum Volume: 3 L, 4 x 750 mL.  
Maximum Tubes: 148 x 5 mL. Timer: 1-59, by 1 sec: 1-4:45, by 15 sec: 5 - 360 min, by 1 min.         
Acceleration Rate: 5 settings. Deceleration Rate: 6 settings. Speed Control: 500 6000 rpm 10 and 100
rpm. G-force Control: 50 4650 x g by 1 x g, 10 x g and 100 x g. Shipping weight is appr: 400 lbs.   


CLICK ON PICTURE TO ENLARGE


CENTRIFUGE              
    MANUFACTURERS PART NUMBER: MEDISPIN          
              MANUFACTURED BY: IEC INTERNATIONAL EQUIP CO.   
        MANUFACTURES WEB SITE: http://www.iec-centrifuge.com                                                    
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 49695
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 780.00
              YOUR PRICE EACH: $ 390.00
                    CONDITION: USED   
                  DESCRIPTION: 
Spins up to six 15 mL or twelve 5 or 10 mL tubes. Includes a timer with 0-30 minute range or HOLD   
feature for continuous operation. Produces a maximum speed of 3100 rpm and a maximum force of 1228 x
g. Includes rotor (6 or 12-place) and standard tube seals.                                          


CLICK ON PICTURE TO ENLARGE


CHART RECORDER          
    MANUFACTURERS PART NUMBER: CT485RS / CT485B  
              MANUFACTURED BY: WHITE BOX/OMEGA               
       LISTED IN ISE CATEGORY:  4710 = CHART RECORDERS AND TEMPERATURE CONTROLS            
             ISE STOCK NUMBER: 13955
           QUANTITY AVAILABLE: 2
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
ONE CT485RS AND ONE CT485B (REPLACES THE CT485RS) HIGH PERFORMANCE. The Model CT485B completely     
self-contained temperature/relative humidity recorder is microprocessor based to accurately measure,
indicate and record temperature and relative humidity. IN EXCELLENT CONDITION. Price is for each    
recorder.                                                                                           


CLICK ON PICTURE TO ENLARGE


CO2 METER               
    MANUFACTURERS PART NUMBER: 1255              
              MANUFACTURED BY: NOVAMETRIX MEDICAL SYSTEMS INC
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13969
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
CAPNOGARD C02 METER. 0 - 76 PCO2 mmHg. SER NO 42-0051.                                              


CLICK ON PICTURE TO ENLARGE


COLLIMATOR POWER SUPPLY 
    MANUFACTURERS PART NUMBER: 70-20236          
              MANUFACTURED BY: PROGENY, INC                  
        MANUFACTURES WEB SITE: http://www.progeny-inc.com                                                          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13797
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
EUREKA LINERA IV COLLIMATOR POWER SUPPLY. MASTER PCB ASSY. 70-08320 REV. A. SER NO ST88016. MFG JAN 
2005.                                                                                               


CLICK ON PICTURE TO ENLARGE


COLONY COUNTER          
    MANUFACTURERS PART NUMBER: 3325              
              MANUFACTURED BY: AMERICAN OPTICAL CO           
       LISTED IN ISE CATEGORY:  2616 = PARTICLE/COLONY COUNTERS                            
             ISE STOCK NUMBER: 15291
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 189.00
              YOUR PRICE EACH: $ 94.50
                    CONDITION: USED   
                  DESCRIPTION: 
COLONY COUNTER IS USED FOR COUNTING BACTERIA COLONIES QUICKLY AND ACCURATELY. A GUIDE PLATE IS SET  
AGAINST A DARK BACKGROUND. AN ADJUSTABLE ROD RAISES OR LOWERS THE STANDARE 1.5X LENS, WHICH ROTATES 
A FULL 360 DEGREES FO EASY ACCESS TO THE CULTURE PLATE. USED IN EXCELLENT CONDITION.                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


COLONY COUNTER          
    MANUFACTURERS PART NUMBER: 3325              
              MANUFACTURED BY: LEICA INC OPTICAL PRODS DIV   
       LISTED IN ISE CATEGORY:  2616 = PARTICLE/COLONY COUNTERS                            
             ISE STOCK NUMBER: 48159
                        VOLTS:   120
                        WATTS:    40
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 700.00
              YOUR PRICE EACH: $ 350.00
                  WEIGHT EACH: 4.60000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
Leica Quebec Darkfield Colony Counter                                                               
Even, glare-free illumination. Light is spread uniformly over the entire culture plate. Colonies are
bright and easily distinguished. Adjustable dish holder for centering both round dishes and square  
culture plates. Adjustable focusing rod. Lens rotates a full 360 deg. Built-in tilt leg. Optional   
1.5X auxiliary lens fits over standard lens, increasing magnification to 3X.  This piece of         
equipment is used but in good condition.                                                            


CLICK ON PICTURE TO ENLARGE


CONDENSER               
    MANUFACTURERS PART NUMBER: 24/40 CONDENSER   
              MANUFACTURED BY: KIMAX                         
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15412
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 88.26
              YOUR PRICE EACH: $ 44.13
                    CONDITION: USED   
                  DESCRIPTION: 
KIMAX CONDENSER HAS 24/40 GROUND GLASS OUTER JOINT AT TOP AND 24/40 GROUND GLASS INNER DRIP JOINT AT
THE BOTTOM. JACKET LENGTH IS 300mm.                                                                 


CLICK ON PICTURE TO ENLARGE


CONDENSER               
    MANUFACTURERS PART NUMBER: 34/45             
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44964
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 86.61
              YOUR PRICE EACH: $ 43.31
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CONTAINER               
    MANUFACTURERS PART NUMBER: SPECIMAN CONTAINER
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15315
           QUANTITY AVAILABLE: 300
        ORIGINAL FACTORY COST: $ 0.47
      YOUR PRICE 1 TO 9 PRICE: $ 0.24
               10 TO 99 PRICE: $ 0.18
             100 TO 999 PRICE: $ 0.17
                    CONDITION: USED   
                  DESCRIPTION: 
SPECIMAN CONTAINER: CUP, SCREW CAP, STERILE, PRICED PER PIECE                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CONTANIMATION CONTROL   
    MANUFACTURERS PART NUMBER: ACCU-V400         
              MANUFACTURED BY: INTL DECONTANIMATION TECH     
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 13970
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 2,000.00
              YOUR PRICE EACH: $ 700.00
                    CONDITION: USED   
                  DESCRIPTION: 
ABSOLUTE CONTANIMATION CONTROL UNIT. HEPA Efficiency 99.97%; Air Flow (CFM) 500-400-300; Speed      
Control 3-speed; Power Requirements 115/1/60; Amps 5; Dimensions (inches) 49 H x 15 W x 15L; Housing
Stainless Steel. IDT's ACCU's are developed to handle the rigorous demands of micro-decontamination 
operations where reliable, high volume air filtration. The unit is in good working condition. There 
is no extra charge to palletize it.                                                                 


CLICK ON PICTURE TO ENLARGE


CRUCIBLES               
    MANUFACTURERS PART NUMBER: PORCELAIN CRUCIBLE
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15421
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 6.95
              YOUR PRICE EACH: $ 3.48
                    CONDITION: USED   
                  DESCRIPTION: 
PORCELAIN GOOCH CRUCIBLES: GLAZED, WITH PERFORATED BOTTOM. USEFUL FOR FILTRATION OF PARTICLES       
GREATER THAN 3/64-IN. DIAMETER                                                                      

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CRYOSURGICAL UNIT       
    MANUFACTURERS PART NUMBER: LL-100            
              MANUFACTURED BY: WALLACH SURGICAL DEVICES, INC 
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13968
           QUANTITY AVAILABLE: 0
              YOUR PRICE EACH: $ 750.00
                    CONDITION: USED   
                  DESCRIPTION: 
USED IN REMOVING SKIN MASSES LIKE SYBACEOUS CYSTS OR SKIN LESIONS. INCLUDES 6 CRYOTIPS. TANK NOT    
INCLUDED. USED AND IN GOOD CONDITION.                                                               


CLICK ON PICTURE TO ENLARGE


CULTURE TUBE            
    MANUFACTURERS PART NUMBER: 60825-571         
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15404
           QUANTITY AVAILABLE: 5,729
        ORIGINAL FACTORY COST: $ 13.49
      YOUR PRICE 1 TO 9 PRICE: $ 6.75
               10 TO 99 PRICE: $ 5.06
             100 TO 999 PRICE: $ 4.73
            1000 AND UP PRICE: $ 4.39
                  WEIGHT EACH: 0.01200 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
DISPOSABLE CULTURE TUBES; 13mm X 100mm, SOLD IN BOXES OF 250                                        

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CULTURE TUBE            
    MANUFACTURERS PART NUMBER: 13X100            
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15319
           QUANTITY AVAILABLE: 1,733
        ORIGINAL FACTORY COST: $ 0.16
      YOUR PRICE 1 TO 9 PRICE: $ 0.08
               10 TO 99 PRICE: $ 0.06
             100 TO 999 PRICE: $ 0.06
            1000 AND UP PRICE: $ 0.05
                  WEIGHT EACH: 0.01200 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
PYRES DISPOSABLE CULTURE TUBES, IDEAL FOR TISSUE CHULTURE AND GENERAL BACTERIALOGICAL USE.          

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CULTURE TUBE            
    MANUFACTURERS PART NUMBER: 45066             
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44802
           QUANTITY AVAILABLE: 4
        ORIGINAL FACTORY COST: $ 0.70
              YOUR PRICE EACH: $ 0.35
                  WEIGHT EACH: 0.04000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
CULTURE TUBES.  20 X 150 MM  WITH SCREW TOPS. GLASS                                                 

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CULTURE TUBE            
    MANUFACTURERS PART NUMBER: 9825              
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 46217
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 0.70
              YOUR PRICE EACH: $ 0.40
                  WEIGHT EACH: 0.02500 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS CULTURE TUBES: 13 X 100 MM, WITH SCREW TOPS                                                   

SORRY PICTURES NOT AVAILABLE AT THIS TIME


CURETTE                 
    MANUFACTURERS PART NUMBER: 3                 
              MANUFACTURED BY: PENN CORP                     
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13447
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 113.00
              YOUR PRICE EACH: $ 45.00
                    CONDITION: USED   
                  DESCRIPTION: 
7 1/4 CURETTE. SIZE 3.                                                                              


CLICK ON PICTURE TO ENLARGE


CURETTE                 
    MANUFACTURERS PART NUMBER: SIZE 0            
              MANUFACTURED BY: GEORGE TIEMANN & CO           
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13450
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 113.00
              YOUR PRICE EACH: $ 45.00
                    CONDITION: USED   
                  DESCRIPTION: 
SIZE 0, 90 DEG ANGLE.                                                                               


CLICK ON PICTURE TO ENLARGE


CURETTE                 
    MANUFACTURERS PART NUMBER: SIZE 6            
              MANUFACTURED BY: GENERIC                       
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13457
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 113.00
              YOUR PRICE EACH: $ 45.00
                    CONDITION: USED   
                  DESCRIPTION: 
SIZE 6.                                                                                             


CLICK ON PICTURE TO ENLARGE


CURETTE                 
              MANUFACTURED BY: PENN CORP                     
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 47460
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 69.00
              YOUR PRICE EACH: $ 30.00
                  WEIGHT EACH: 0.36000 POUNDS
                    CONDITION: NEW    
                  DESCRIPTION: 
SET OF SIX MEDICAL TOOLS USED TO SCRAPE AND REMOVE TISSUE SOLD AS A SET                             


CLICK ON PICTURE TO ENLARGE


CUVETTES                
    MANUFACTURERS PART NUMBER: 301               
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15359
           QUANTITY AVAILABLE: 8
        ORIGINAL FACTORY COST: $ 0.75
              YOUR PRICE EACH: $ 0.38
                    CONDITION: USED   
                  DESCRIPTION: 
CUVETTES: 13X100mm                                                                                  

SORRY PICTURES NOT AVAILABLE AT THIS TIME


DIAL READING VISCOMETER 
    MANUFACTURERS PART NUMBER: RVF               
              MANUFACTURED BY: BROOKFIELD ENGINEERING LAB INC
        MANUFACTURES WEB SITE: http://www.brookfieldengineering.com                                      
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 44533
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 3,654.00
              YOUR PRICE EACH: $ 1,827.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
BROOKFIELD DIAL READING VISCOMETER, NEEDS REPAIR. INCLUDES A BROOKFIELD HELIPATH STAND, MODEL C.    


CLICK ON PICTURE TO ENLARGE


DIAL READING VISCOMETER 
    MANUFACTURERS PART NUMBER: LVF               
              MANUFACTURED BY: BROOKFIELD ENGINEERING LAB INC
        MANUFACTURES WEB SITE: http://www.brookfieldengineering.com                                      
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 45096
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 1,225.65
              YOUR PRICE EACH: $ 612.83
                    CONDITION: USED   
                  DESCRIPTION: 
VISCOMETER.                                                                                         


CLICK ON PICTURE TO ENLARGE


DIGIRAMP POWER SUPPLY   
    MANUFACTURERS PART NUMBER: TEL 2813          
              MANUFACTURED BY: TEL-ATOMIC, INC.              
        MANUFACTURES WEB SITE: http://www.telatomic.com                                                              
       LISTED IN ISE CATEGORY:  2630 = LAB: MISCELLANEOUS                                  
             ISE STOCK NUMBER: 45020
                        VOLTS:   120
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                  WEIGHT EACH: 7.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
THE  POWER SUPPLY IS USED AS AN EDUCATIONAL TOOL IN UNIVERSITY PHYSICS. THREE PUSH BUTTON SWITCHES  
SELECT THE DISPLAY TO READ FULL OUTPUT kV, CENTER TAP OUTPUT (CT) AND CURRENT, mA. A ROTARY COARSE  
VOLTAGE CONTROL INCRESES THE kV DC VOLTAGE. A 10 TURN HELICAL POTENTIOMETER, SITUATED WITHIN HINGED 
DOORS ON THE TOP SURFACE OF THE INSTRUMENT PROVIDES ULTRA-FINE CONTROL OF THE kV OUTPUT TO A MAX    
VOLTAGE PRESET BY THE COARSE VOLTAGE CONTROL.                                                       


CLICK ON PICTURE TO ENLARGE


DISPENSER               
    MANUFACTURERS PART NUMBER: 1500XL            
              MANUFACTURED BY: EFD                           
        MANUFACTURES WEB SITE: http://www.efd-inc.com                                                                  
       LISTED IN ISE CATEGORY:  9000 = TEMP LIST OF NEW INVENTORY                          
             ISE STOCK NUMBER: 48152
                        VOLTS:   120
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 600.00
              YOUR PRICE EACH: $ 300.00
                  WEIGHT EACH: 6.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
The 1500XL dispenser increases yields and reduces rejects in fiber optic assembly processes by using
a timed air pulse to apply the same amount of adhesive on every part. Unlike hand syringes, dental  
picks and other manual tools that rely on operator judgement to control the amount of adhesive      
applied, the microprocessor-based 1500XL makes it easy for any worker to make accurate, consistent  
deposits as small as 0.008 inches in diameter. Used in excellent condition.                         
To order additional dispensing components call:  1-800-828-3331                                     
                                                                                                    


CLICK ON PICTURE TO ENLARGE


DISTILLING RECIEVER     
    MANUFACTURERS PART NUMBER: 24/40 PYREX       
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15419
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 107.32
              YOUR PRICE EACH: $ 53.66
                    CONDITION: USED   
                  DESCRIPTION: 
BARRETT DISTILLING RECEIVER. FOR USE IN DETERMINATION OF WATER CONTENT OF PETROLEUM OR BITUMINOUS   
PRODUCTS                                                                                            


CLICK ON PICTURE TO ENLARGE


DUAL CONNECTOR TUBING   
    MANUFACTURERS PART NUMBER: 66N454CC          
              MANUFACTURED BY: BAXTER HEALTHCARE CORP        
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12921
           QUANTITY AVAILABLE: 3
              YOUR PRICE EACH: $ 40.00
                    CONDITION: USED   
                  DESCRIPTION: 
FOR USE WITH DUO-THERM SINGLE PATIENT PAD AND K-MODULE.                                             


CLICK ON PICTURE TO ENLARGE


Diagnostic X-Ray apparat
    MANUFACTURERS PART NUMBER: OP-91AA-2         
              MANUFACTURED BY: TOSHIBA CORPORATION-JAPAN     
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13915
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 300.00
                  WEIGHT EACH: 60.20000 POUNDS
                    CONDITION: AS IS  
                  DESCRIPTION: 
DIAGNOSTIC X-RAY APPARATUS MODEL OP-91AA-2 SERIAL# C1603467, ATTACHED TO CSII X-RAY IMAGE           
INTENSIFIER MODEL RTH9206H-P6 SERIAL# 93941, MFR DATE SEPT. 1991 BY TOSHIBA. DIMENSIONS: BASE 16" x 
16", 22 3/4" TALL.                                                                                  


CLICK ON PICTURE TO ENLARGE


ECG PATIENT CABLE       
    MANUFACTURERS PART NUMBER: 0012-00-0620-01   
              MANUFACTURED BY: DATASCOPE PATIENT MONITORING  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12928
           QUANTITY AVAILABLE: 7
              YOUR PRICE EACH: $ 19.99
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


EKG CABLE               
    MANUFACTURERS PART NUMBER: 007514            
              MANUFACTURED BY: BURDICK MEDICAL               
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12927
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 143.00
              YOUR PRICE EACH: $ 65.00
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


ELECTRIC STIRRER        
    MANUFACTURERS PART NUMBER: 1750              
              MANUFACTURED BY: ARROW ENGINEERING             
        MANUFACTURES WEB SITE: http://www.arrowengineering.com                                                
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 17509
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 420.00
              YOUR PRICE EACH: $ 210.00
                    CONDITION: USED   
                  DESCRIPTION: 
THIS UNIT IS NOT WORKING.  SELLING FOR PARTS.                                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


ELECTRODE IMP. METER    
    MANUFACTURERS PART NUMBER: EZM3A             
              MANUFACTURED BY: GRASS MEDICAL INSTRUMENTS CO  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12922
           QUANTITY AVAILABLE: 0
              YOUR PRICE EACH: $ 45.00
                    CONDITION: USED   
                  DESCRIPTION: 
100 KOHM METER. ELECTRODE AND BATTERY TEST GOOD. LEADS NOT INCLUDED.                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


ELECTROLYTE ANAYZER     
    MANUFACTURERS PART NUMBER: 9180              
              MANUFACTURED BY: AVL SCIENTIFIC                
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13971
                        VOLTS:   120
           QUANTITY AVAILABLE: 0
              YOUR PRICE EACH: $ 1,250.00
                    CONDITION: USED   
                  DESCRIPTION: 
SER NO U18.2111. USED AND IN GOOD CONDITION. The analyzer is the best solution for performing       
electrolytic analysis from whole blood as well as plasma, urine dialysate, serum or aqueous         
standards. This medical instrument is easy to use and provide fast sample analysis. It has the      
capability to provide accurate, and yet consistent results within one minute. This instrument's     
enhanced microprocessor-based technology and easy to use design provides top performance and        
operational flexibility. Quick change of analyte, user friendliness, flexibility, and low           
maintenance are other important features that can be attained with the use of AVL 9180. The unit was
removed from a facility in working condition. It does power up and goes through its power up self   
test with no problems. We do not have the facilities to perform a full test on the unit.Shipping    
dimensions are: 16" x 16" x 18", approximately 20lbs.                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


ERLENMEYER FLASK        
    MANUFACTURERS PART NUMBER: 250mL             
              MANUFACTURED BY: PYREX DIV OF OWENS CORNING    
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15314
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 13.65
              YOUR PRICE EACH: $ 6.83
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX ERLENMEYER FLASK 250 ML                                                                       
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


EXAMINATION TABLE       
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 48224
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 950.00
              YOUR PRICE EACH: $ 200.00
                  WEIGHT EACH: 97.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


EYE SHIELD/FACE MASK    
    MANUFACTURERS PART NUMBER: 5194-E COMBO      
              MANUFACTURED BY: ALPHAPROTECH, INC.            
        MANUFACTURES WEB SITE: http://www.alphaprotech.com                                                        
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 11345
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 47.00
              YOUR PRICE EACH: $ 23.50
                    CONDITION: NEW    
                  DESCRIPTION: 
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FILM DIGITIZER          
    MANUFACTURERS PART NUMBER: LUMISCAN 75       
              MANUFACTURED BY: LUMISYS, INC                  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12979
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 500.00
                    CONDITION: USED   
                  DESCRIPTION: 
LUMISCAN MEDICAL SCANNER FOR SCANNING X-RAY FILMS INTO A COMPUTER. THIS UNIT IS THE SCANNING SECTION
WITHOUT THE CONTROLLER CARD                                                                         


CLICK ON PICTURE TO ENLARGE


FILTER HOUSING          
    MANUFACTURERS PART NUMBER: MDS4463GN4MFH4    
              MANUFACTURED BY: PALL CORPORATION              
        MANUFACTURES WEB SITE: http://www.pall.com                                                                        
       LISTED IN ISE CATEGORY:  2630 = LAB: MISCELLANEOUS                                  
             ISE STOCK NUMBER: 48427
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 488.20
              YOUR PRICE EACH: $ 244.10
                    CONDITION: USED   
                  DESCRIPTION: 
THE PALL MDS FILTER HOUSINGS ARE MADE FOR SMALL FLOW APPLICATIONS INVOLVING FILTRATION OF EITHER    
LIQUIDS OR GASES. THE MDS4463 HOUSINGS ACCOMODATES MC* OR MD* STYLE CARTRIDGES WITH LIQUID FLOW     
RATES UP TO 7.5L/MIN (2GAL/MIN) AND GAS FLOW UP TO 100Nm^3/HOUR (60SCFM). THE HOUSINGS ARE USED AND 
IN EXCELLENT CONDITION. STAINLESS HOUSING, SILICONE O-RING, T-TYPE FLOW PATH DESIGN, 1/4" NPT-F     
HOUSING CONNECTION, 150 MAX PSIG, 10.3 MAX BAR, 284 PRESSURE MEASUREMENT SCALE (F.)                 


CLICK ON PICTURE TO ENLARGE


FLASK                   
    MANUFACTURERS PART NUMBER: 500mL             
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15310
           QUANTITY AVAILABLE: 8
        ORIGINAL FACTORY COST: $ 15.99
              YOUR PRICE EACH: $ 8.00
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX GLASS VOLUMETRIC FLASKS                                                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FLASK                   
    MANUFACTURERS PART NUMBER: 2000mL FLASK      
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15339
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 67.00
              YOUR PRICE EACH: $ 33.50
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX ERLENMEYER FLASK, 2000ml CAPACITY                                                             
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FLASK                   
    MANUFACTURERS PART NUMBER: 25mL FLASK KIMAX  
              MANUFACTURED BY: KIMAX                         
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15423
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 18.95
              YOUR PRICE EACH: $ 9.48
                    CONDITION: USED   
                  DESCRIPTION: 
KIMAX GLASS VOLUMETRIC FLASKS, 25mL                                                                 

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FLASK                   
    MANUFACTURERS PART NUMBER: 200mL             
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15311
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 12.65
              YOUR PRICE EACH: $ 6.33
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX VOLUMETRIC FLASK                                                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FLASK                   
    MANUFACTURERS PART NUMBER: 500mL             
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44956
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 22.07
              YOUR PRICE EACH: $ 11.04
                  WEIGHT EACH: 0.08000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
KIMAX VOLUMETRIC FLASK.                                                                             
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FLEXTIPS MINI           
    MANUFACTURERS PART NUMBER: CXM50             
              MANUFACTURED BY: CHEMTRONICS INC               
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13707
           QUANTITY AVAILABLE: 7
              YOUR PRICE EACH: $ 10.00
                    CONDITION: NEW    
                  DESCRIPTION: 
CELLULAR URETHANE CLEANING SWABS ENTRAP AND REMOVE PARTICLES FROM ALL SENTIVE AREAS. 100% LINT-FREE 
AND NONABRASIVE. APPLICATIONS: ELECTRONIC EQUIPMENT, HIGH TOLERANCE PRECISION PARTS, MEDICAL        
DEVICES, LABORATORY EQUIPMENT AND SENSITIVE OPTICAL SURFACES.                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUME EXTRACTION SYSTEM  
    MANUFACTURERS PART NUMBER: HJ3100            
              MANUFACTURED BY: AMERICAN HAKKO PRODUCTS       
        MANUFACTURES WEB SITE: http://www.hakkousa.com                                                                
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 48226
                        VOLTS:   120
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 583.17
              YOUR PRICE EACH: $ 291.59
                  WEIGHT EACH: 23.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
THE HJ3100 FUME AND SMOKE EXTRACTION UNIT IS DESIGNED EXPRESSLY FOR USE AT SOLDERING STATIONS,      
EXTRACTING THE CONTAMINATED AIR DIRECTLY AT THE SOURCE. THE HJ3100 IS A HIGH-MASS FLOW, LOW VACUUM  
SYSTEM. CONTAMINATED AIR IS CAPTURED FROM THE WORKPLACE SURROUNDING THE SOLDERING STATION BY THE    
HOOD OR HOODS, AND TRANSFERRED TO THE HJ3100 UNIT BY FLEXIBLE OR RIGID DUCTS.                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUME HOOD               
    MANUFACTURERS PART NUMBER: BIOFLOW           
              MANUFACTURED BY: THE GERMFREE LABORATORIES, INC
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 49688
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 2,500.00
              YOUR PRICE EACH: $ 2,000.00
                  WEIGHT EACH: 350.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
Class II, Type A hoods are used to protect personnel, product and environment from bioaerosols and  
particulates. These hoods offer personnel protection through negative pressure airflow into the     
cabinet. To protect the product, the work area in the cabinet is continuously bathed with           
ultra-clean air provided through the supply HEPA filter. Approximately 70% of the air from each     
cycle is recirculated through this supply HEPA filter. The remaining air (approximately 30%) is     
discharged from the hood through the exhaust HEPA filter, protecting the environment. Although not  
required for the majority of uses, all of our hoods have the capability of being vented to the      
outside environment. The unit is 49" wide, 27" deep and 58" high. The working area is 47" wide, 17" 
deep and 21" high.                                                                                  

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUNNEL                  
    MANUFACTURERS PART NUMBER: PEAR FUNNEL KIMAX 
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15385
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 45.95
              YOUR PRICE EACH: $ 22.98
                    CONDITION: USED   
                  DESCRIPTION: 
KIMAX SQUIBB PEAR FUNNERLS WITH GLASS STOPPERS                                                      
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUNNEL                  
    MANUFACTURERS PART NUMBER: F7405-1           
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44765
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 5.79
              YOUR PRICE EACH: $ 2.90
                    CONDITION: USED   
                  DESCRIPTION: 
RIBBED MOONEY AIR VENT FUNNEL, (PROFIT) TWO MOONEY AIR VENTS TO PERMIT FREE ESCAPE OF AIR.          

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUNNEL                  
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 47850
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 39.95
              YOUR PRICE EACH: $ 19.98
                    CONDITION: USED   
                  DESCRIPTION: 
HEAVY DUTY GLASS FUNNEL                                                                             

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUNNEL FILTER           
    MANUFACTURERS PART NUMBER: GELMAN 4201       
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15415
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 85.00
              YOUR PRICE EACH: $ 42.50
                    CONDITION: USED   
                  DESCRIPTION: 
DESIGNED FOR VACUM FILTRATION OF LIQUIDS, FUNNEL IS SUITABLE FOR ANALYSIS OF PARTICULATES AND       
MICROBIOLOGICAL CONTAMINANTS USING MEMBRANE FILTER TECHNIQUE.                                       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


FUNNEL FILTER           
    MANUFACTURERS PART NUMBER: FILTER FUNNEL     
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15429
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 52.00
              YOUR PRICE EACH: $ 26.00
                    CONDITION: USED   
                  DESCRIPTION: 
FUNNEL, FILTER                                                                                      

SORRY PICTURES NOT AVAILABLE AT THIS TIME


GAS DELIVERY SYSTEM     
    MANUFACTURERS PART NUMBER: F1100             
              MANUFACTURED BY: SPECTRA GASES                 
        MANUFACTURES WEB SITE: http://www.spectragases.com                                                        
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 12523
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
F1100 Series: Spectra Gases F1100 series gas delivery process panels are designed for use in High   
Purity systems where corrosive and toxic gas levels reach 20% of the mixture. Material of           
construction-316-L Stainless Steel. Regulator: Single Stage Tied Diaphragm-3000 psig max. inlet     
pressure-Cv = 0.16-seating material: PCTFE. Stainless Steel Pigtail with CGA connection.            
IN EXCELLENT CONDITION!!                                                                            


CLICK ON PICTURE TO ENLARGE


GAS REGULATOR           
    MANUFACTURERS PART NUMBER: 00651             
              MANUFACTURED BY: V. MUELLER                    
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13961
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 95.00
                    CONDITION: USED   
                  DESCRIPTION: 
COMES WITH TWO GAUGES: ONE V MUELLER ARM/LEG PRESSURE GAUGE (25-750 PSI) AND ONE GAS PRESSURE GAUGE 
(0-2000 PSI). USED AND GOOD CONDITION.                                                              


CLICK ON PICTURE TO ENLARGE


GLASS BOTTLE            
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44770
           QUANTITY AVAILABLE: 38
        ORIGINAL FACTORY COST: $ 0.95
      YOUR PRICE 1 TO 9 PRICE: $ 0.48
               10 TO 99 PRICE: $ 0.36
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS BOTTLE WITH BLACK CAP. 1" DIA X 3.5" LONG                                                     

SORRY PICTURES NOT AVAILABLE AT THIS TIME


GRADUATED CYCLINDER     
    MANUFACTURERS PART NUMBER: TC/TD             
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 47903
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 10.00
              YOUR PRICE EACH: $ 5.00
                  WEIGHT EACH: 0.06000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GRADUATED CYCLINDER 50ML PLASTIC                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


HEATED TANK             
    MANUFACTURERS PART NUMBER: W-20-LC           
              MANUFACTURED BY: D.C. COOPER COMPAMY           
        MANUFACTURES WEB SITE: http://www.dccoopertanks.com                                                      
       LISTED IN ISE CATEGORY:  2615 = LAB: WATERBATH, INSTRUMENT BATHS/TANKS              
             ISE STOCK NUMBER: 48230
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
HEATED TANKS FOR WAX - PLASTIC COATINGS - POTTING COMPOUNDS - ADHESIVES - DEGREASING TANKS -        
C;EANING SYSTEMS - AUTO AGITATING ANN DIPPING TANKS.                                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


HEATER                  
    MANUFACTURERS PART NUMBER: H2025-1A          
              MANUFACTURED BY: BAXTER SCIENTIFIC PRODUCTS    
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 15274
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 120.00
              YOUR PRICE EACH: $ 65.00
                    CONDITION: USED   
                  DESCRIPTION: 
MULTIBLOK HEATER                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


HEATER HUMIDIFIER       
    MANUFACTURERS PART NUMBER: 380-80            
              MANUFACTURED BY: REPIRATORY CARE INC HUDSON RCI
        MANUFACTURES WEB SITE: http://www.hudsonrci.com                                                              
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 48396
           QUANTITY AVAILABLE: 6
        ORIGINAL FACTORY COST: $ 400.00
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
CONCHA THERM III HEATER HUMIDIFIER FOR AIRWAY AND OTHER MEDICAL PATIENTS THIS UNIT IS THE CONTROLLER
FOR WARMING AND HUMIDIFING THE AIR SUPPLY FOR PATIETS WHO NEED BREATHING ASSISTANCE.THESE UNITS WERE
USED IN A MEDICAL DEVICE FACTORY. THEY DO NOT HAVE THE WATER TANK, THERMOCOUPLE OR OTHER            
ACCESSORIES. THESE UNITS ARE SOLD AS IS AND ARE NOT FOR MEDICAL USE.                                


CLICK ON PICTURE TO ENLARGE


HEATER INDUSTRIAL       
    MANUFACTURERS PART NUMBER: H2025-1A          
              MANUFACTURED BY: LAB LINE INSTRUMENTS INC      
        MANUFACTURES WEB SITE: http://www.labline.com                                                                  
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 44496
                        VOLTS:   120
                     AMPERAGE:   0.8
                        WATTS:   100
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 250.00
              YOUR PRICE EACH: $ 125.00
                  WEIGHT EACH: 6.62000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
BAXTER MULTI-BLOCK HEATER: 120V, .83A, 100 WATTS, SN: 1293-8683                                     


CLICK ON PICTURE TO ENLARGE


HEATING MANTLE          
    MANUFACTURERS PART NUMBER: HEATING MANTLE    
              MANUFACTURED BY: GLAS-COL                      
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 19264
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 43.95
              YOUR PRICE EACH: $ 26.00
                    CONDITION: USED   
                  DESCRIPTION: 
HEMISPHERICAL HEATING MANTLE BOTTOMS (ONLY), FOR BEAKERS 200mL AND LARGER, OPERATES ON 115 VAC,     
50/60 Hz                                                                                            

SORRY PICTURES NOT AVAILABLE AT THIS TIME


HEATING/STIRRING MODULE 
    MANUFACTURERS PART NUMBER: REACTI-THERM III  
              MANUFACTURED BY: PIERCE                        
        MANUFACTURES WEB SITE: http://www.piercenet.com                                                              
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 49669
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 3,000.00
              YOUR PRICE EACH: $ 1,500.00
                    CONDITION: USED   
                  DESCRIPTION: 
THE HEATING STIRRING MODULE PART NUMBER IS 18935. IT COMES WITH TWO REACTI-VAP III, P/N 18783 AND   
18785. 27 3 1/4" AND 27 4 5/8" STAINLESS STEEL NEEDLES ARE INCLUDED.                                


CLICK ON PICTURE TO ENLARGE


HOT PLATE               
    MANUFACTURERS PART NUMBER: HOT PLATE         
              MANUFACTURED BY: FISHER SCIENTIFIC             
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 15392
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 350.00
              YOUR PRICE EACH: $ 175.00
                  WEIGHT EACH: 17.54000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
THERMASTIRRING HOT PLATE                                                                            


CLICK ON PICTURE TO ENLARGE


HOT PLATE               
    MANUFACTURERS PART NUMBER: HP-A1915B         
              MANUFACTURED BY: SYBRON CORP.                  
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 38805
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
THERMOLYNE TYPE 1900 HOT PLATE 374B, 120 Vac, 750 watt variable, 6 & 1/4" square top. IN WORKING    
CONDITION.                                                                                          


CLICK ON PICTURE TO ENLARGE


HOT PLATE               
    MANUFACTURERS PART NUMBER: 600T              
              MANUFACTURED BY: FISHER SCIENTIFIC             
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 48595
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: AS IS  
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


HOT PLATE / STIRRER     
    MANUFACTURERS PART NUMBER: MR 3002S          
              MANUFACTURED BY: HEIDOLPH INSTRUMENTS LLC      
        MANUFACTURES WEB SITE: http://www.heidolph.ant.iqi.de/en_gb/laboratory                
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 48172
                        VOLTS:   120
                        WATTS:   625
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 1,275.00
              YOUR PRICE EACH: $ 637.50
                  WEIGHT EACH: 5.65000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
The MR3002S is a precision hot plate with a variable speed mixer. Manufacturers specifications:     
Silumin (aluminum alloy) hot plate for superior heat transfer. Four independent circuits for your   
ultimate safety. Analog 0-10 V interface available. Maximum hot plate temperature of 300 deg C.     
Maximum sample temperature of 250 deg C. Digital speed setting up to 1,250 rpm + 1%. Maximum 20L    
stirring capacity. Speed accuracy of 1%. Electronic temperature control. Heating power of 600 Watts.
Hotplate temperature accuracy: + 5 deg C. Over temperature protection. Protection class IP 32. Plate
diameter: 145 mm.                                                                                   


CLICK ON PICTURE TO ENLARGE


HOT PLATE/STIRRER       
    MANUFACTURERS PART NUMBER: PC-353            
              MANUFACTURED BY: CORNING INCORPORATED          
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 48175
                        VOLTS:   120
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


HYGROMETER              
    MANUFACTURERS PART NUMBER: SYSTEM II         
              MANUFACTURED BY: PANAMETRICS INC               
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 48589
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: AS IS  
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


INCUBATOR               
    MANUFACTURERS PART NUMBER: INC-003           
              MANUFACTURED BY: LAB LINE INSTRUMENTS INC      
        MANUFACTURES WEB SITE: http://www.labline.com                                                                  
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 48137
           QUANTITY AVAILABLE: 0
              YOUR PRICE EACH: $ 350.00
                    CONDITION: USED   
                  DESCRIPTION: 
LAB LINE INSTRUMENTS INCUBATOR. TEST CHAMBER DIMENSIONS 10" WIDE 7" DEEP AND 6" HIGH OUTER          
DIMENSIONS 12"HIGH  X 12"WIDE X 9" DEEP. HAS MERCURY THERMOMETER THAT MOUNTS IN A HOLE THROUGH THE  
TOP.                                                                                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


INCUBATOR               
    MANUFACTURERS PART NUMBER: THELCO 4          
              MANUFACTURED BY: PRECISION SCIENTIFIC INC      
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 49671
           QUANTITY AVAILABLE: 0
              YOUR PRICE EACH: $ 550.00
                    CONDITION: USED   
                  DESCRIPTION: 
21"W x 22"L x 38"H. INSIDE CHAMBER 16"L x 17"W x 27"H. UP TO 60 DEG C.                              


CLICK ON PICTURE TO ENLARGE


INCUBATOR               
    MANUFACTURERS PART NUMBER: 3311              
              MANUFACTURED BY: W.H. CURTIN & CO              
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 49675
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 2,200.00
              YOUR PRICE EACH: $ 1,100.00
                    CONDITION: USED   
                  DESCRIPTION: 
46"L x 23"W x 37"H. DUAL CHAMBER DIMENSIONS: 15"L x 17"W x 26"H EACH.                               


CLICK ON PICTURE TO ENLARGE


INLINE HOT STAMPER      
    MANUFACTURERS PART NUMBER: 236M MRA          
              MANUFACTURED BY: MARKEM CORP.                  
        MANUFACTURES WEB SITE: http://www.markem.com/index.isp                                                
       LISTED IN ISE CATEGORY:  2630 = LAB: MISCELLANEOUS                                  
             ISE STOCK NUMBER: 48163
                        VOLTS:   120
           QUANTITY AVAILABLE: 0
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
INLINE HOT STAMP PRINTER FOR EMBOSING LABELS INTO PLASTIC COMPONENTS                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


INSTRUMENT BATH         
    MANUFACTURERS PART NUMBER: CIDE-BATH         
              MANUFACTURED BY: SIMPSON/BASYE                 
       LISTED IN ISE CATEGORY:  2615 = LAB: WATERBATH, INSTRUMENT BATHS/TANKS              
             ISE STOCK NUMBER: 12938
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


INTERMITENT SUCTION UNIT
              MANUFACTURED BY: OHIO MEDICAL PRODUCTS         
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12909
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 450.00
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
Unilogic Module: Pneumatic, quiet, reliable operation. Returns to atmospheric pressure during "OFF" 
cycle. Fully Adjustable: 3 to 30 seconds, "ON" and "OFF" independently adjustable, factory preset at
15 seconds on/8 seconds off (begins in the off mode). Ser. No. AHBF08258.                           


CLICK ON PICTURE TO ENLARGE


ION PUMP CONTROL        
    MANUFACTURERS PART NUMBER: 222-0610          
              MANUFACTURED BY: PERKIN ELMER ULTEK DIV        
       LISTED IN ISE CATEGORY:  6640 = VACUUM PUMPS: BACKER, DIFFUSION, GAUGES, ACCESSORIES
             ISE STOCK NUMBER: 48596
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: AS IS  
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


IONIZER                 
    MANUFACTURERS PART NUMBER: ENDSTAT 2010      
              MANUFACTURED BY: RICHMOND TECHNOLOGY, INC.     
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 48145
                        VOLTS:   120
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 245.00
              YOUR PRICE EACH: $ 122.50
                    CONDITION: USED   
                  DESCRIPTION: 
DEIONIZER MADE BY RICHMOND TECHNOLOGY.                                                              


CLICK ON PICTURE TO ENLARGE


IV STANDS               
    MANUFACTURERS PART NUMBER: IV STANDS         
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 43335
           QUANTITY AVAILABLE: 4
        ORIGINAL FACTORY COST: $ 89.00
              YOUR PRICE EACH: $ 30.00
                  WEIGHT EACH: 25.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
IV STANDS: HOSPITAL STYLE HOLDERS , MADE OF STAINLESS, SOME WITH 4 WHEELS, SOME WITH FIVE, USED SOLD
AS IS                                                                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LABORATORY MIXER        
    MANUFACTURERS PART NUMBER: 4554-10           
              MANUFACTURED BY: COLE PARMER INSTRUMENT COMPANY
        MANUFACTURES WEB SITE: http://www.coleparmer.com                                                            
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 12551
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
STAINLESS STEEL THREE-BLADE PROPELLER. SOLD AS IS. IT IS IN WORKING CONDITION. 3-250/50-5000 RPM.   


CLICK ON PICTURE TO ENLARGE


LADLE                   
    MANUFACTURERS PART NUMBER: 9mL LADLE SAMPLER 
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15395
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 15.95
              YOUR PRICE EACH: $ 7.98
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX SAMPLING LADLE                                                                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LAMINAR FLOW HOOD       
    MANUFACTURERS PART NUMBER: 636-C             
              MANUFACTURED BY: L M AIR TECHNOLOGY            
        MANUFACTURES WEB SITE: http://www.laminaire.com                                                              
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 48132
                        VOLTS:   115
                     AMPERAGE:   7.0
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 4,500.00
              YOUR PRICE EACH: $ 2,250.00
                    CONDITION: USED   
                  DESCRIPTION: 
LAMINAIRE 1 PHASE, 60 CY, 115V, 7AMPS, WHITE. OVERALL DIMENSIONS: 78.5"H x 75"L x 26"W. HOOD        
DIMENSIOS: 37.5"H x 73"L x 18"W. THE FLOW HOOD USES A 3" THICK HEPA FILTER.                         


CLICK ON PICTURE TO ENLARGE


LAMINAR FLOW HOOD       
    MANUFACTURERS PART NUMBER: EG6252            
              MANUFACTURED BY: THE BAKER COMPANY             
        MANUFACTURES WEB SITE: http://www.bakerco.com                                                                  
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 48227
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 2,500.00
              YOUR PRICE EACH: $ 1,250.00
                  WEIGHT EACH: 680.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
EDGEGARD IS A HORIZONTAL LAMINAR FLOW CLEAN BENCH WHICH PROVIDES A HEPA (HIGH EFFICIENCY PARTICULATE
AIR) FILTERED AIRFLOW ACROSS THE WORK AREA, AND A PARTICULATE-FREE WORK SURFACE. BECAUSE ONLY HEPA  
FILTERED AIR CROSSES THE WORK SURFACE, THE CABINET IS IDEAL FOR A RANGE OF LIFE SCIENCE AND         
INDUSTRIAL LABORATORY AND PROCESS APPLICATIONS WHERE CLEAN AIR AND PRODUCT PROTECTION IS ESSENTIAL. 
FEATURES UNIQUE HIGH VELOCITY RETURN AIR SLOTS. OVERALL DIMENSIONS: 74'L x 35.5"W x 69.5"H. HOOD    
DIMENSIONS: 32"W x 28"H x 70.5"L.                                                                   


CLICK ON PICTURE TO ENLARGE


LARYNGOSCOPE            
              MANUFACTURED BY: WELCH ALLYN                   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13964
           QUANTITY AVAILABLE: 14
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
BLADES INCLUDE: 4 MACHINTOSH (2), 2 (SICOA) MAC (4) & MAC (2), 3 MAC (3), 2 WELCH ALLYN (3) #685 &  
#670, 1 FOREGGER (SEARLES), 1 WELCH ALLYN 66002 (2) AND 1 DRAGER (1 1/2).                           


CLICK ON PICTURE TO ENLARGE


LATEX TUBING            
    MANUFACTURERS PART NUMBER: T6500             
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 17517
           QUANTITY AVAILABLE: 25
        ORIGINAL FACTORY COST: $ 1.98
      YOUR PRICE 1 TO 9 PRICE: $ 0.99
               10 TO 99 PRICE: $ 0.74
                    CONDITION: USED   
                  DESCRIPTION: 
TUBING: LATEX, 1/8"O.D. X 1/35" WALL, SOLD BY THE FOOT                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LATEX TUBING            
    MANUFACTURERS PART NUMBER: 4647010           
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44757
           QUANTITY AVAILABLE: 10
        ORIGINAL FACTORY COST: $ 1.50
      YOUR PRICE 1 TO 9 PRICE: $ 0.75
               10 TO 99 PRICE: $ 0.56
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS TUBING ASSORTED SIZES UNDER 12"                                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LIQUID ADAPTOR          
    MANUFACTURERS PART NUMBER: LG-2040-098       
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44947
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 26.10
              YOUR PRICE EACH: $ 13.05
                    CONDITION: USED   
                  DESCRIPTION: 
ADAPTOR 5ML, LIQUID INLET WITH INTER JOINT AND SIDE HOSE CONNECTION FOR VACUUM SOURCE.              
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LIQUID ADAPTOR          
    MANUFACTURERS PART NUMBER: LG-2040-104       
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44948
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 31.05
              YOUR PRICE EACH: $ 15.53
                    CONDITION: USED   
                  DESCRIPTION: 
ADAPTOR 5ML, LIQUID INLET WITH INTER JOINT AND SIDE HOSE CONNECTION FOR VACUUM SOURCE.              
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


LITE BOX                
    MANUFACTURERS PART NUMBER: 48830             
              MANUFACTURED BY: WELCH ALLYN                   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13962
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 150.00
                    CONDITION: USED   
                  DESCRIPTION: 
LITE BOX, USED IN GOOD CONDITION. COMES WITH STAND ON CASTERS. Mounts easily on a wall, stand, or   
examination table. Durable fiber optic light pipe bends to almost any position and transmits cool   
illumination. Easily positioned small head leaves clear view of task areas. Sealed focusing sleeve  
keeps optics free of dust. Provides homogeneous spot and variable size. Ideal for gynecological     
examinations and minor procedures.                                                                  


CLICK ON PICTURE TO ENLARGE


LUMISCOPE DIGITRONIC    
    MANUFACTURERS PART NUMBER: 100-041           
              MANUFACTURED BY: INFINITE SOUND EVOLUTION      
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 45680
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 40.00
              YOUR PRICE EACH: $ 20.00
                  WEIGHT EACH: 2.34000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
SPHYGMAMANOMETER. MEASUES BLOOD PRESSURE.                                                           

SORRY PICTURES NOT AVAILABLE AT THIS TIME


MAGNETIC STIRRER        
    MANUFACTURERS PART NUMBER: S8252-1           
              MANUFACTURED BY: AMERICAN DADE                 
       LISTED IN ISE CATEGORY:  9000 = TEMP LIST OF NEW INVENTORY                          
             ISE STOCK NUMBER: 48210
                        VOLTS:   120
                     AMPERAGE:   0.3
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                  WEIGHT EACH: 4.00000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
SERIAL NO. 004221                                                                                   


CLICK ON PICTURE TO ENLARGE


MAMMOGRAPHY PROCESSOR   
    MANUFACTURERS PART NUMBER: MIN-R             
              MANUFACTURED BY: KODAK HEALTH IMAGING SYSTEMS, 
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 49636
                        VOLTS:   220
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
Standard or rapid-cycle processing: The Kodak Min-R mammography processor provides a selectable (set
at installation) standard or rapid processing cycle. The standard cycle is recommended for          
optimal processing of Kodak Min-R 2000 mammography film. This 142-second cycle delivers 164         
mammography film sheets an hour (18 x 24 cm). A new 106-second rapid-processing cycle delivers 209  
film sheets an hour (18 x 24 cm). This cycle, set at installation, will keep pace with rapid-cycle  
mammography                                                                                         
film, and can be used for all Kodak T-Mat films (or equivalent general-purpose films) up to 35 x 43 
cm in a shared processing environment.                                                              


CLICK ON PICTURE TO ENLARGE


MANUAL RESUSCITATOR     
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12923
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
FOR ADULTS.                                                                                         


CLICK ON PICTURE TO ENLARGE


MICROPROCESSOR PUMP CNTL
    MANUFACTURERS PART NUMBER: 7592-60           
              MANUFACTURED BY: COLE PARMER INSTRUMENT COMPANY
        MANUFACTURES WEB SITE: http://www.coleparmer.com                                                            
       LISTED IN ISE CATEGORY:  2630 = LAB: MISCELLANEOUS                                  
             ISE STOCK NUMBER: 48490
           QUANTITY AVAILABLE: 2
              YOUR PRICE EACH: $ 300.00
                    CONDITION: USED   
                  DESCRIPTION: 
FOR USE WITH COLE PARMER PUMP 7592-50, SN 11586.                                                    


CLICK ON PICTURE TO ENLARGE


MIXER MOTORIZED         
    MANUFACTURERS PART NUMBER: 700-5400          
              MANUFACTURED BY: BARNANT CO                    
        MANUFACTURES WEB SITE: http://www.barnant.com                                                                  
       LISTED IN ISE CATEGORY:  9900 = NOT FOR SALE  FOR ISE USE ONLY                      
             ISE STOCK NUMBER: 48156
                     AMPERAGE:   0.8
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 395.00
              YOUR PRICE EACH: $ 197.50
                    CONDITION: USED   
                  DESCRIPTION: 
USED FOR MIXING GLUES OR SOLVENTS. MADE BY BARNANT IN USA. IT IS EQUIPPED WITH SPEED CONTROL MOTOR, 
115 VOLTS, 1.3 AMPS., 60 HZ. RPM 5000 WITH 10" STAINLESS STEEL SHAFT WITH A 1.5", THREE PROPELLER   
BLADE.                                                                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


MOTORIZED XRAY VIEWER   
    MANUFACTURERS PART NUMBER: MV-4000A          
              MANUFACTURED BY: RADX TECHNOLOGY               
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 49640
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 25,000.00
              YOUR PRICE EACH: $ 12,000.00
                    CONDITION: USED   
                  DESCRIPTION: 
Lamps: 2 lamps per section (4 sections per tier). Proprietary lampsaver system. Dimming: 5          
positions. Viewing format: 4-over-4 (14 x 17 inch). Viewing area: (wxh) 57 x 17 in. per belt. Films 
transport mechanism: 2 single-tier, horizontal belts; 50 frames per belt. Capacity total: 400?14 x  
17 inch. Masking: two (vertical) motorized shades in the center segment of each tier. Frame access: 
next/prior; optional (autoselect). Specific frame access: optional keypad for numeric entry         
(autoselect). Dimensions, in inches: Shipping: (wxhxd) 69 x 74 x 30, including casters. Operating:  
(wxhxd) 69 x 74 x 41.5, including casters. Desk: (wxhxd) 57 x 29 x 14. Depth of leg space: 21.      
Weight: 940 lbs. Electrical: 117 vac, 60 hz, 9 amps. Color temperature rating: 6,500 k. Maximum heat
output: 4,000 btu/hr.                                                                               


CLICK ON PICTURE TO ENLARGE


NASAL SPECULUM          
    MANUFACTURERS PART NUMBER: 70-1072           
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 47459
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 22.98
              YOUR PRICE EACH: $ 18.00
                    CONDITION: USED   
                  DESCRIPTION: 
ADULT VIENNA NASAL SPECULUM                                                                         


CLICK ON PICTURE TO ENLARGE


NEEDLE HOLDER           
    MANUFACTURERS PART NUMBER: 4893              
              MANUFACTURED BY: BD DIAGNOSTICS                
        MANUFACTURES WEB SITE: http://www.vacutainer.com                                                            
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 15343
           QUANTITY AVAILABLE: 1,000
        ORIGINAL FACTORY COST: $ 0.30
      YOUR PRICE 1 TO 9 PRICE: $ 0.15
               10 TO 99 PRICE: $ 0.15
             100 TO 999 PRICE: $ 0.15
            1000 AND UP PRICE: $ 0.15
                    CONDITION: NEW    
                  DESCRIPTION: 
HOLDER: FOR USE WITH VACUTAINER BRAND EVACUATED GLASS TUBES & NEEDLES, SOLD IN PACKAGES OF 10       

SORRY PICTURES NOT AVAILABLE AT THIS TIME


O2 ACCUMULATOR ASSY     
    MANUFACTURERS PART NUMBER: 231142            
              MANUFACTURED BY: PURITAN BENNETT               
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12924
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


OTOSCOPE/OPTHALMOSCOPE  
    MANUFACTURERS PART NUMBER: 74710             
              MANUFACTURED BY: WELCH ALLYN                   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13959
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 500.00
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
OTOSCOPE/OPTHALMOSCOPE SET CONTAINS ONE MODEL 74710 POWER SUPPLY (NEEDS NEW CABLE ON RIGHT SIDE) TWO
MODEL 11710 OPTHALMOSCOPE (ONE WORKS THE OTHER NEEDS A NEW LAMP) TWO OPERATING OTOSCOPES   POSSIBLY 
MODEL 21701 (BOTH LIGHT UP) AND ONE MODEL 25020 OTOSCOPE. SIX PIECES IN TOTAL.                      

SORRY PICTURES NOT AVAILABLE AT THIS TIME


OVERHEAD TUBECRANE,X-RAY
    MANUFACTURERS PART NUMBER: 713.500           
              MANUFACTURED BY: CONTINENTAL X-RAY CORP        
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13912
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 350.00
                    CONDITION: PULLS  
                  DESCRIPTION: 
OVERHEAD TUBECRANE FOR X-RAY ROOM EQUIPMENT, MODEL 6713.500, SERIAL # 985619,INPUT RATINGS: VOLTAGE 
120, CURRENT 1.0A, HZ 60 PHASE 1, MFR DATE JULY 1998. COMES WITH UNIVERSAL TUBESTAND LOCK CONTROL   
ASM 5284.135.05 REV 012, PCB 4284.135.05. ALSO WAMPFLER CABLE REEL MODEL EKT-10H CAPACITY 67.5 KG,  
CABLE TRAVEL 1.5M.                                                                                  


CLICK ON PICTURE TO ENLARGE


PACEMAKER               
    MANUFACTURERS PART NUMBER: ETP-180           
              MANUFACTURED BY: MEDAC, INC.                   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 15293
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 249.00
              YOUR PRICE EACH: $ 75.00
                    CONDITION: USED   
                  DESCRIPTION: 
NON-INVASIVE PACEMAKER SN:1280. RA LA LL ECG OUTPUTS. DOES NOT COME WITH LEADS OR L400 CHARGER.     


CLICK ON PICTURE TO ENLARGE


PANORAMIC X-RAY UNIT    
    MANUFACTURERS PART NUMBER: PM 2002 EC PROLINE
              MANUFACTURED BY: PLANMECA OY                   
        MANUFACTURES WEB SITE: http://www.planmeca.com                                                                
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13715
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 8,900.00
              YOUR PRICE EACH: $ 1,250.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
The Panoramic X-Ray unit comes with the Tube Housing Assy., Tube Type D-052SB, Tube # 9D6207, model 
LBL-X-006C, Ser. No. RTH 998706, Beam Limiting Device and Cassette Holder model 3MM, Ser. No. REC   
404146. The unit was removed from service in working condition. We are selling the unit for parts.  


CLICK ON PICTURE TO ENLARGE


PARTICLE COUNTER        
    MANUFACTURERS PART NUMBER: 242-32            
              MANUFACTURED BY: ROYCO INSTRUMENTS INC         
       LISTED IN ISE CATEGORY:  2616 = PARTICLE/COLONY COUNTERS                            
             ISE STOCK NUMBER: 38608
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PATIENT MONITOR         
    MANUFACTURERS PART NUMBER: 2200I             
              MANUFACTURED BY: DATASCOPE PATIENT MONITORING  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12976
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 500.00
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PATIENT MONITOR         
    MANUFACTURERS PART NUMBER: CENFLEX           
              MANUFACTURED BY: DATASCOPE PATIENT MONITORING  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12977
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 200.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
CENFLEX PATIENT MONITOR SET COMPRISING OF MODELS CENFLEX, CENFLEX+4, CENFLEX MASTER AND CENFLEX     
PROFILE. SELLING AS A SET.                                                                          


CLICK ON PICTURE TO ENLARGE


PATIENT MONITOR         
    MANUFACTURERS PART NUMBER: 2000A             
              MANUFACTURED BY: DATASCOPE PATIENT MONITORING  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 49641
                        VOLTS:   115
           QUANTITY AVAILABLE: 7
              YOUR PRICE EACH: $ 300.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PATIENT MONITOR RECORDER
    MANUFACTURERS PART NUMBER: 2000R             
              MANUFACTURED BY: DATASCOPE PATIENT MONITORING  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12919
           QUANTITY AVAILABLE: 3
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
Printer chart speeds of 1, 12.5 and 25 mm/sec and 5 mm/min; 50 mm. Chart paper has 40 mm grid.      
Printer input modes - diagnostic ECG, delay ECG, P1 pulse, P2, CO2, trend, ext. REMOVED FROM SERVICE
5/98. MUST RECEIVE PM/ELECTRICAL SAFETY INSPECTION PRIOR TO RETURING TO SERVICE. ONE UNIT HAS FRONT 
COVER MISSING.                                                                                      


CLICK ON PICTURE TO ENLARGE


PETRI DISHES            
    MANUFACTURERS PART NUMBER: U-06148-00        
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44806
           QUANTITY AVAILABLE: 56
        ORIGINAL FACTORY COST: $ 12.95
      YOUR PRICE 1 TO 9 PRICE: $ 6.48
               10 TO 99 PRICE: $ 4.86
                  WEIGHT EACH: 0.08000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
PETRI DISH FOR BIOLOGIAL SAMPLES. 50MM COMES WITH LIDS.                                             

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PH METER                
    MANUFACTURERS PART NUMBER: 445               
              MANUFACTURED BY: CORNING INCORPORATED          
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 49663
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
Features: Clock with battery backup (10 day). Timer (10 seconds to 10 hours). Data logger (stores up
to 10 readings). Selectable high/low alarms in pH mode. Record last calibration time and points.    
Specifications: PH RANGE:-1.99 TO 19.99. mV RANGE: +/- 1999.9. TEMP RANGE: -5.0 TO 105.0 DEG        
CELCIUS.                                                                                            


CLICK ON PICTURE TO ENLARGE


PIPETS                  
    MANUFACTURERS PART NUMBER: 13-670C           
              MANUFACTURED BY: FISHER SCIENTIFIC             
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 13917
           QUANTITY AVAILABLE: 9
        ORIGINAL FACTORY COST: $ 85.00
              YOUR PRICE EACH: $ 63.75
                    CONDITION: NEW    
                  DESCRIPTION: 
Green Product Fisherbrand Nonsterile Reusable Borosilicate Glass Milk Bacteriological Pipets >      
Capacity: 1mL; Graduations: 1mL. with permanent markings. Sold in cases of twelve. Tuf-Temp*        
treated.                                                                                            


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: PIPETS            
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44517
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 72.00
              YOUR PRICE EACH: $ 36.00
                    CONDITION: USED   
                  DESCRIPTION: 
ASSORTED PIPETTES, AUSJENA REFRACTOMETER, MOD. 1                                                    
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15357
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 20.00
              YOUR PRICE EACH: $ 10.00
                    CONDITION: USED   
                  DESCRIPTION: 
PYREX FILTERING FLASK WITH SIDE ARM TUBULATION                                                      


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: 43301-1           
              MANUFACTURED BY: INTERNATIONAL BIOPRODUCTS     
        MANUFACTURES WEB SITE: http://www.intlbioproducts.com                                                  
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15400
           QUANTITY AVAILABLE: 1,500
        ORIGINAL FACTORY COST: $ 0.10
      YOUR PRICE 1 TO 9 PRICE: $ 0.05
               10 TO 99 PRICE: $ 0.04
             100 TO 999 PRICE: $ 0.04
            1000 AND UP PRICE: $ 0.03
                  WEIGHT EACH: 0.00900 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
PLASTIC MILK PIPETTE, 1.1 ML EA. PRICE EACH                                                         
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 14670-103         
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15410
           QUANTITY AVAILABLE: 480
        ORIGINAL FACTORY COST: $ 0.09
      YOUR PRICE 1 TO 9 PRICE: $ 0.05
               10 TO 99 PRICE: $ 0.04
             100 TO 999 PRICE: $ 0.04
                    CONDITION: USED   
                  DESCRIPTION: 
DISPOSABLE TRANSFER PIPETTES, 7mL                                                                   
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 22-44-175-2       
              MANUFACTURED BY: EPPENDORF                     
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15432
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 200.00
              YOUR PRICE EACH: $ 100.00
                    CONDITION: USED   
                  DESCRIPTION: 
AUTOCLAVABLE PIPETTE: PISTON DRIVEN AIR DISPLACEMENT. CHEMICAL AND UV RESISTANT WITH A STREAMLINED  
DESIGN AND NO-SLIP GRIP. ONE SINGLE BUTTON CONTROLS ALL SAMPLE ASPIRATION, SAMPLE DELIVERY AND TIP  
EJECTION.                                                                                           


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: 6480              
              MANUFACTURED BY: 3M CORPORATE                  
        MANUFACTURES WEB SITE: http://www.mmm.com                                                                          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15434
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 179.00
              YOUR PRICE EACH: $ 89.50
                    CONDITION: USED   
                  DESCRIPTION: 
PRECISION MANUAL DILUTOR, DEDICATED TO A 1/10 RATIO DILUTIONS OF AQUEOUS SOLUTIONS, FIXED DILUTING  
PIPETTE                                                                                             
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 2560-0034-04      
              MANUFACTURED BY: TRI-CONTINENT SCIENTIFIC INC  
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15435
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 145.00
              YOUR PRICE EACH: $ 72.50
                    CONDITION: USED   
                  DESCRIPTION: 
DE-TIPPER AND MICRO DE-TIPPER PIPETTE, PISTON ASSEMBLY.                                             


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: 5074              
              MANUFACTURED BY: TRI-CONTINENT SCIENTIFIC INC  
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15442
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 89.00
              YOUR PRICE EACH: $ 44.50
                    CONDITION: USED   
                  DESCRIPTION: 
POSITIVE DISPLACEMENT MICRO-PIPETTE                                                                 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: 18mL GLASS PIPETTE
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15451
           QUANTITY AVAILABLE: 8
        ORIGINAL FACTORY COST: $ 6.95
              YOUR PRICE EACH: $ 3.48
                    CONDITION: USED   
                  DESCRIPTION: 
VOLUMETRIC GLASS PIPETTE 18ML                                                                       
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: PLASTIC PIPETTES  
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15461
           QUANTITY AVAILABLE: 1,500
        ORIGINAL FACTORY COST: $ 0.08
      YOUR PRICE 1 TO 9 PRICE: $ 0.04
               10 TO 99 PRICE: $ 0.03
             100 TO 999 PRICE: $ 0.03
            1000 AND UP PRICE: $ 0.03
                    CONDITION: USED   
                  DESCRIPTION: 
DISPOSABLE PIPETTE TIPS                                                                             
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PIPETTE                 
    MANUFACTURERS PART NUMBER: 2 ML              
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44800
           QUANTITY AVAILABLE: 50
        ORIGINAL FACTORY COST: $ 14.80
      YOUR PRICE 1 TO 9 PRICE: $ 7.40
               10 TO 99 PRICE: $ 5.55
                    CONDITION: USED   
                  DESCRIPTION: 
2 ML GRADUATED                                                                                      

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 37040             
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44801
           QUANTITY AVAILABLE: 16
        ORIGINAL FACTORY COST: $ 40.00
      YOUR PRICE 1 TO 9 PRICE: $ 20.00
               10 TO 99 PRICE: $ 15.00
                  WEIGHT EACH: 0.08000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS PIPETTE 11 MIL, PRICE PER EACH.                                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: PIPETS            
              MANUFACTURED BY: KIMAX                         
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44525
           QUANTITY AVAILABLE: 0
        ORIGINAL FACTORY COST: $ 768.00
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
ASSORTED PIPETTES                                                                                   
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45896
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 12.30
              YOUR PRICE EACH: $ 6.15
                  WEIGHT EACH: 0.06000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
PIPETTE VOLUMETRIC,COLOR CODED CLASS A.LENGHT 370 MM PIPET IS 5 ML CAPACITY.                        
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 570               
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45897
           QUANTITY AVAILABLE: 16
        ORIGINAL FACTORY COST: $ 12.56
      YOUR PRICE 1 TO 9 PRICE: $ 6.28
               10 TO 99 PRICE: $ 4.71
                  WEIGHT EACH: 0.04000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS PIPETTE 9 ML CAPACITY 280 MM LONG                                                             
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 3500              
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45898
           QUANTITY AVAILABLE: 7
        ORIGINAL FACTORY COST: $ 15.38
              YOUR PRICE EACH: $ 7.69
                  WEIGHT EACH: 0.04000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS PIPETTE 17.6ML CAPACITY, SEALED 3,                                                            

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 45899
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 15.82
              YOUR PRICE EACH: $ 7.91
                  WEIGHT EACH: 0.06000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS PIPETTE 18ML CAPACITY LENTH 280MM                                                             
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 100 uL            
              MANUFACTURED BY: EPPENDORF                     
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 12465
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
100 MICRO LITER PIPET. YELLOW TIP.                                                                  

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 1000 uL           
              MANUFACTURED BY: EPPENDORF                     
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 12466
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
1000 MICRO LIET PIPETTE. BLUE TIP.                                                                  

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 37079             
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 46490
           QUANTITY AVAILABLE: 18
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                  WEIGHT EACH: 0.08000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
GLASS PIPETTE, KIMAX-51, 20 DEGREES C, 11 MLW33                                                     
                                                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTE                 
    MANUFACTURERS PART NUMBER: 72102             
              MANUFACTURED BY: KIMBLE                        
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 47467
           QUANTITY AVAILABLE: 50
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                  WEIGHT EACH: 0.03600 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
SEROLOGICAL PIPET, BOROSILICATE GLASS, PLUGGED, STERILE, 10ML X 1/10.                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PIPETTOR                
    MANUFACTURERS PART NUMBER: 5006110-8         
              MANUFACTURED BY: BRINKMANN INSTRUMENTS INC     
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15307
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 314.00
              YOUR PRICE EACH: $ 157.00
                    CONDITION: USED   
                  DESCRIPTION: 
POSITIVE DISPLACEMENT PIPETTOR: AN INTEGRATED DISPOSABLE TIP/PISTON ASSEMBLY REDUCES                
CROSS-CONTAMINATION BY ELIMINATING CARRYOVER AND AEROSOLS. VOLUME IS CONTINUOUSLY ADJUSTABLE FROM   
2-10mL. AUTOMATIC LOCK VOLUME SETTINGS.                                                             


CLICK ON PICTURE TO ENLARGE


PITCHER                 
    MANUFACTURERS PART NUMBER: 1 GALLON PITCHER  
              MANUFACTURED BY: INFINITE SOURCE ELECTRONICS   
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15382
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 3.50
              YOUR PRICE EACH: $ 1.75
                    CONDITION: USED   
                  DESCRIPTION: 
PLASTIC PITCHER: DUAL GRADUATIONS, GALLONS AND LITERS                                               

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PLASTIC BOTTLE          
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 48036
           QUANTITY AVAILABLE: 1,000
        ORIGINAL FACTORY COST: $ 0.20
      YOUR PRICE 1 TO 9 PRICE: $ 0.10
               10 TO 99 PRICE: $ 0.08
             100 TO 999 PRICE: $ 0.07
            1000 AND UP PRICE: $ 0.07
                    CONDITION: USED   
                  DESCRIPTION: 
PLASTIC BOTTLE WITH SCREW ON CAP. SIZE 16MM DIA X 54MM HIGH.                                        

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PLASTIC TRAY            
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 10373
           QUANTITY AVAILABLE: 4
        ORIGINAL FACTORY COST: $ 9.95
              YOUR PRICE EACH: $ 4.98
                    CONDITION: NEW    
                  DESCRIPTION: 
LAB PLASTIC TRAYS. 12" X 8" 4"D.                                                                    

SORRY PICTURES NOT AVAILABLE AT THIS TIME


POCKET COMPARATOR       
    MANUFACTURERS PART NUMBER: 605-HT            
              MANUFACTURED BY: ORBECO-HELLIGE, INC.          
        MANUFACTURES WEB SITE: http://www.orbeco.com                                                                    
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 10675
           QUANTITY AVAILABLE: 2
        ORIGINAL FACTORY COST: $ 46.00
              YOUR PRICE EACH: $ 20.00
                  WEIGHT EACH: 0.42000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
COMPARATOR HOUSING WITH 2 NO. 600-T13 PRECISION TUBES. THE COMPARATOR IS IN GOOD CONDITION. DOES NOT
HAVE A MAGNIFIER.                                                                                   

SORRY PICTURES NOT AVAILABLE AT THIS TIME


POLYGRAPH MACHINE       
    MANUFACTURERS PART NUMBER: 7D                
              MANUFACTURED BY: GRASS MEDICAL INSTRUMENTS CO  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13911
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 1,500.00
                    CONDITION: USED   
                  DESCRIPTION: 
UNIT CONSISTS OF: 4 - LOW LEVEL DC PRE-AMPLIFIERS, P/N 7P1F; 4 - WIDEBAND AC PRE-AMPLIFIERS, P/N    
7P3B; 1 - EKG TACHOGRAPH PRE-AMPLIFIER, P/N 7P4F; 10 - POLYGRAPH DC DRIVER AMPLIFIERS, P/N 7DAF; 1 -
POWER CONTROL PANEL, P/N 7PCM12 AND 1 - SIGNAL MARKER, P/N SMT7L.                                   


CLICK ON PICTURE TO ENLARGE


PRECISION HEATING UNIT  
    MANUFACTURERS PART NUMBER: H8292-213513      
              MANUFACTURED BY: FIBROSYSTEM                   
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 15271
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 240.00
              YOUR PRICE EACH: $ 120.00
                    CONDITION: USED   
                  DESCRIPTION: 
FOR USE IN VITRO DIAGNOSTICS                                                                        


CLICK ON PICTURE TO ENLARGE


PRECISION LEAK TESTER   
    MANUFACTURERS PART NUMBER: MDT-50            
              MANUFACTURED BY: TM ELECTRONICS, INC.          
        MANUFACTURES WEB SITE: http://www.tmelectronics.com                                                      
       LISTED IN ISE CATEGORY:  2617 = LEAK DETECTORS                                      
             ISE STOCK NUMBER: 48428
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 4,495.00
              YOUR PRICE EACH: $ 2,247.50
                    CONDITION: AS IS  
                  DESCRIPTION: 
THE MDT-50 USES CLEAN DRY AIR TO TEST PLASTIC OR METAL PARTS. APPLICATIONS INCLUDE AUTOMOTIVE,      
MEDICAL, PHARMACEUTICALS AND FOOD PROCESSING. THE START/STOP SWITCH IS MISSING. SOLD AS IS.         

PDF FILE
CLICK ON PICTURE TO ENLARGE


PRECISION SECTIONING SAW
    MANUFACTURERS PART NUMBER: 351-IS-8143       
              MANUFACTURED BY: BUEHLER LTD.                  
       LISTED IN ISE CATEGORY:  2613 = LAB: INCUBATORS, HEATERS, STIRRERS, MIXERS, HOT PLA 
             ISE STOCK NUMBER: 48765
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: AS IS  
                  DESCRIPTION: 
FOR SECTIONING SAMPLES FOR ANALYSIS, MICROMETER ADJUST FOR THICKNESS.                               


CLICK ON PICTURE TO ENLARGE


PRESET SNAP-IN SENSOR   
    MANUFACTURERS PART NUMBER: S-72              
              MANUFACTURED BY: PSG INDUSTRIES INC            
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 12722
           QUANTITY AVAILABLE: 9
        ORIGINAL FACTORY COST: $ 2.08
              YOUR PRICE EACH: $ 1.04
                    CONDITION: NEW    
                  DESCRIPTION: 
ACCUTHERM 72F/23.3C.                                                                                

SORRY PICTURES NOT AVAILABLE AT THIS TIME


PRESS ADMINISTRATIOM CUF
    MANUFACTURERS PART NUMBER: 42351             
              MANUFACTURED BY: ABBOTT LABORATORIES           
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13967
           QUANTITY AVAILABLE: 3
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
                                                                                                    


CLICK ON PICTURE TO ENLARGE


PRINTER/DATA RECORDER   
    MANUFACTURERS PART NUMBER: 90323             
              MANUFACTURED BY: SPACELABS HEALTHCARE          
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13957
           QUANTITY AVAILABLE: 1
              YOUR PRICE EACH: $ 175.00
                    CONDITION: AS IS  
                  DESCRIPTION: 
SER NO 313000565, 50mm recorder. SOLD AS IS.                                                        


CLICK ON PICTURE TO ENLARGE


PULSE OXIMETER          
    MANUFACTURERS PART NUMBER: VITALMAX 500      
              MANUFACTURED BY: PACE TECH INC                 
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 12920
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 2,295.00
              YOUR PRICE EACH: $ 500.00
                    CONDITION: USED   
                  DESCRIPTION: 
The Vitalmax 500 Pulse Oximeter with Temperature and Respiration is a programmable non-invasive     
monitor that measures oxygen saturation, pulse, temperature and respiration. It is designed for use 
in the operating room, intensive care unit, emergency room, neonatal I.C.U., clinics and emergency  
service vehicles. Due to the nature of this item and the medical nature of its use we cannot        
guarantee that this unit will be operating within specifications therefore it is important that the 
buyer have the unit recertified for its intended use.                                               


CLICK ON PICTURE TO ENLARGE


PULSE OXIMETER          
    MANUFACTURERS PART NUMBER: N-1000            
              MANUFACTURED BY: NELLCOR INC                   
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13972
           QUANTITY AVAILABLE: 2
              YOUR PRICE EACH: $ 200.00
                    CONDITION: USED   
                  DESCRIPTION: 
PULSE OXIMETER PATIENT MONITOR. USED AND IN GOOD CONDITION. UNITS COME WITH PRE-AMP CABLES ONLY. The
Nellcor N-1000 features include: pulse search indicator, SAO2, pulse rate, pulse amplitude          
indicator, alarms visible and audible, high and low sat., high and low rate, battery backup, digital
output display, end-tidal CO2, plethysmography wave form, freeze N2O, respiratory rate, memory,     
trends, and automatic calibration.                                                                  


CLICK ON PICTURE TO ENLARGE


PULSEFLOW CONTROLLER    
    MANUFACTURERS PART NUMBER: 7851              
              MANUFACTURED BY: RICHMOND TECHNOLOGY, INC.     
       LISTED IN ISE CATEGORY:  2610 = LAB: EQUIPMENT: VISCOMETER, CENTRIFUGE              
             ISE STOCK NUMBER: 12527
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 460.00
              YOUR PRICE EACH: $ 230.00
                    CONDITION: USED   
                  DESCRIPTION: 
RICHMOND STATIC CONTROL SYSTEMS.                                                                    


CLICK ON PICTURE TO ENLARGE


PUMP INFUSION           
    MANUFACTURERS PART NUMBER: 965               
              MANUFACTURED BY: IMED CORPORATION              
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 43344
                        VOLTS:   120
           QUANTITY AVAILABLE: 3
        ORIGINAL FACTORY COST: $ 695.00
              YOUR PRICE EACH: $ 200.00
                  WEIGHT EACH: 15.68000 POUNDS
                    CONDITION: AS IS  
                  DESCRIPTION: 
PUMP: VOLUMETRIC INFUSION, SN#965-12552A, RECHARGABLE BATTERY. SOLD AS IS FOR PARTS.                


CLICK ON PICTURE TO ENLARGE


QUICK CLAMP             
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44905
           QUANTITY AVAILABLE: 12
        ORIGINAL FACTORY COST: $ 22.00
      YOUR PRICE 1 TO 9 PRICE: $ 11.00
               10 TO 99 PRICE: $ 8.25
                    CONDITION: USED   
                  DESCRIPTION: 
QUICK OR LEVER CLAMPS LARGE 6"                                                                      

SORRY PICTURES NOT AVAILABLE AT THIS TIME


QUICK CLAMP             
    MANUFACTURERS PART NUMBER: C6018             
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44752
           QUANTITY AVAILABLE: 32
        ORIGINAL FACTORY COST: $ 16.75
      YOUR PRICE 1 TO 9 PRICE: $ 8.38
               10 TO 99 PRICE: $ 6.29
                    CONDITION: USED   
                  DESCRIPTION: 
LEVER LOCKS CLAMPS TO HOLD DOWN ANYTHING                                                            

SORRY PICTURES NOT AVAILABLE AT THIS TIME


RECIRCULATOR, HEATED    
    MANUFACTURERS PART NUMBER: EX-200            
              MANUFACTURED BY: BROOKFIELD ENGINEERING LAB INC
        MANUFACTURES WEB SITE: http://www.brookfieldengineering.com                                      
       LISTED IN ISE CATEGORY:  2619 = AIR/GAS/LIQUID PURIFICATION                         
             ISE STOCK NUMBER: 48201
                        VOLTS:   115
           QUANTITY AVAILABLE: 1
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
THE BROOKFIELD EX-200 REFRIGERATED, CIRCULATING BATH HAS A TEMPERATURE RANGE OF -30C TO 120C. IT    
ALSO FEATURES 2 PRE-SET TEMPERATURES OF 25C AND 37C AND HAS STABILITY OF +/-0.01C. PUMP CAPACITY IS 
0-13L/MIN WITH AN 800W HEATER. THE EX-200 BATH IS STAINLESS STEEL WITH CAPACITY OF 11L AND HAS AN   
ADDITIONAL LARGE RESERVOIR WITH A 2-POSITION PLATFORM WHICH ALLOWS DIRECT IMMERSION OF A VARIETY OF 
SAMPLE CONTAINERS SUCH AS WOULD BE USED WITH THE BROOKFIELD VISCOMETERS. EXTERNAL COOLING IS        
REQUIRED FOR TEMPERATURES BELOW 50C. NOTE: A COOLING COIL IS ALREADY BUILT IN.                      


CLICK ON PICTURE TO ENLARGE


REPIPET DILUTOR         
    MANUFACTURERS PART NUMBER: 3010AU            
              MANUFACTURED BY: LABINDUSTRIES                 
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 15430
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 145.00
              YOUR PRICE EACH: $ 72.50
                  WEIGHT EACH: 0.74000 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
REPIPET: ASPIRATES SAMPLE AND DISPENSES MEASURED REAGENT VOLUME WITH 1% ACCURACY                    


CLICK ON PICTURE TO ENLARGE


RESPIROMETER            
    MANUFACTURERS PART NUMBER: RM121             
              MANUFACTURED BY: MEDISHIELD                    
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 13966
           QUANTITY AVAILABLE: 2
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                    CONDITION: USED   
                  DESCRIPTION: 
0.01-20 LITER GAUGE. USED AND IN GOOD CONDITION.                                                    


CLICK ON PICTURE TO ENLARGE


ROLLER PUMP             
    MANUFACTURERS PART NUMBER: 10-00-00          
              MANUFACTURED BY: STOCKERT INSTRUMENTE          
        MANUFACTURES WEB SITE: http://www.stoeckrt.de                                                                  
       LISTED IN ISE CATEGORY:  6980 = MEDICAL AND DENTAL EQUIPMENT                        
             ISE STOCK NUMBER: 48146
                        VOLTS:   250
                     AMPERAGE:   1.2
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 2,500.00
              YOUR PRICE EACH: $ 1,500.00
                    CONDITION: USED   
                  DESCRIPTION: 
Standard Clinical Grade Roller Pump Ser. No. 10 F 5716. The pump delivers and sustains, at 250 rpm, 
consistent flow rates of between about 100 and about 100ml/min. Meter reads 3345.                   


CLICK ON PICTURE TO ENLARGE


RUBBER STOPPER          
    MANUFACTURERS PART NUMBER: R5160-7           
              MANUFACTURED BY: MANUFACTURER UNKNOWN          
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 44756
           QUANTITY AVAILABLE: 1
        ORIGINAL FACTORY COST: $ 0.42
              YOUR PRICE EACH: $ 0.21
                    CONDITION: USED   
                  DESCRIPTION: 
RUBBER STOPPER 3 HOLE.                                                                              

SORRY PICTURES NOT AVAILABLE AT THIS TIME


SAMPLE CUP              
    MANUFACTURERS PART NUMBER: B2717-5           
              MANUFACTURED BY: AMERICAN SCIENTIFIC PRODUCTS  
       LISTED IN ISE CATEGORY:  2600 = LAB: GLASSWARE: BEAKERS, FLASKS, PIPETS             
             ISE STOCK NUMBER: 47886
           QUANTITY AVAILABLE: 4,000
         >>> ALL OFFERS ARE SUBMITTED FOR APPROVAL! <<<
                  WEIGHT EACH: 0.00400 POUNDS
                    CONDITION: USED   
                  DESCRIPTION: 
CONICAL HITACHI TYPE NONSTERILE POLYSTYRENE                                                         

SORRY PICTURES NOT AVAILABLE AT THIS TIME


SIGNAL CONDITIONER      
    MANUFACTURERS PART NUMBER: OM3-WBS-30        
              MANUFACTURED BY: OMEGA                         
       LISTED IN ISE CATEGORY:  2630 = LAB: MISCELLANEOUS